|
||||||||||||||||||||||||||||||||||||||||||||||
|
![]() ![]()
![]() ![]() ![]() ![]() ![]() * Dimensions: 23" X 15" * Weight: 45lbs * Air flow: 560 cfm * Voltage options: 115 or 220 volts * Watts: 120 on high, 40 on low * Varialbe speed motor: 28.1 db on low - 62.3 db on high * Pressure seal on the filter chambe ensures that all of the dirty air passes through the filter. * Felt gaskets seal the filter chamber. * Backward curved motorized impeller eliminates the vibrations and noise associated with older motor and shaft set ups * Clean air does not pass over the motor. * Unimpeded airflow: simple and direct airflow avoids the air turbulence, inefficiency and noise associated with other system. * Separate electrical parts chamber prevents any off gassing from capacitors, condensers or switches. * ETL Certified - Comforms to CSA C22.2 no 113 ANSI/UL 507 ![]() ![]() ![]() ![]() * Carbon bed: 2" deep x 570 square inch surface. * Carbon filter dimensions: 13" X 13" X 9" * 40 sq ft of true HEPA: 10 pleats per inch. Pleats warm rolled with separators. * 2 Micro-Suppress filters: suppress bacteria and viruses around the carbon bed. * Polyester pre-filter ![]() ![]() * HEPA filter typically last 5 years in regular use. * Pre-filters can be vacuumed from the exterior of the unit and should be changed every 12 months depending on use. ![]() ![]() If within ten (10) years from the date of the original purchase by the end-user from the Authorized Dealer, an Airpura R600, V600 or UV600 (with the exception of filters or UV lamps) is proved to be defective by reason only of faulty workmanship or materials, Airpura Industries Inc. will at their option repair or replace the part or product free of charge for labor only. Any replacement parts deemed necessary by Airpura Industries will be charged to the purchaser. Obvious defects must be communicated to the Authorized Dealer within 10 days from the purchase date. This warranty shall not apply to damage caused through misuse, wear and tear, neglect, unauthorized repair or to damage caused through installation, adaptation, modification or use in an improper manner or inconsistent with Airpura’s operating and maintenance instructions, wear or deterioration due to environmental conditions or to damage occurred during transit. Airpura Industries will not be liable under this warranty for any fault or damage arising from defective workmanship, if the product has been serviced, repaired or modified by any person other than Airpura Industries Inc. or the manufacturer’s serial label has been removed or tampered with. All products returned for service or repair must be accompanied with a RA (Return Authorization) number. The RA number must be clearly visible on the external packaging. The absence of an RA number will delay the service or repair process, for any shipment to Airpura Industries Inc. not accompanied with a RA number will not be accepted or will be immediately sent back to the shipper. Please contact Airpura Industries Inc to receive a RA number prior to shipment. ![]() ![]() In the event the unit is damaged or defective, please save all packing material and contact our Customer Service Department immediately for further instructions. ![]() |
![]()
|
||||||||||||||||||||||||||||||||||||||||||||