|
||||||||||||||||||||||||||||||||
|
![]() ![]()
![]() ![]() ![]() The CWR Kwick Connect Reverse Osmosis system features a T.F.C. membrane (thin film membrane), which removes more contaminants than other water treatment systems. Reverse Osmosis is the process of water passing through a semi permeable membrane in order to balance the concentration of contaminants on each side of the membrane. A semi permeable membrane is a barrier that will pass some particles like pure water, but not other particles like arsenic and lead. This is why RO systems produce both pure drinking water and waste water that is flushed from the system. ![]() ![]() * 4.0 Gallon plastic storage tank * Tank dimensions: height 17" and width 9". * Color coded cartridges connect directly to the unit by a simple 1/4 turn. * Filter housings are eliminated. No mess during cartridge replacement! * Internal valves automatically shut-off flow when cartridges are removed. * Cartridges have double o-rings so they won't leak. * Compact design, so the unit requires less space below your sink! * All components are an integral part of the unit, which requires fewer tube connections for greater reliability. * Filter Dimensions: 12" x 12" x 3". * 35-100 PSI Operation Pressure. PSI > 80 requires pressure regulator. * Typical rejection rate 98% (total dissolved solids). ![]() ![]() ![]() ![]() * The second stage is the 5 micron sediment filter that traps sediment and other particulate matter like dirt, silt and rust which affect the taste and appearance of your water. *The third stage is the heart of the reverse osmosis system, the RO membrane. This semi permeable membrane will effectively take out total dissolved solids, sodium and heavy metals as well as cysts, such as giardia and cryptosporidium. *Because the process of making this high quality drinking water takes time, your RO water treatment system is equipped with a storage tank. *The fourth stage is an inline granular activated carbon (GAC). This filter is used after the water storage tank, and is used as a final polishing filter. ![]() ![]() * The R/O post filter should be changed every 12 months. * The R/O pre-filter should be changed every 6 months. * The R/O membrane should be changed every 2 years. ![]() ![]() ![]() ![]() In the event the unit is damaged or defective, please save all packing material and contact our Customer Service Department immediately for further instructions. ![]() |
|
||||||||||||||||||||||||||||||