|
|||||||||||||||||||||||||||||||||||||
|
Product Description:
Imperial Ultra-Ceramic + Metalgon Replacement Filter. This filter is for the Crown Models only. This is CWR's highest and most efficient ceramic filter with added protection from chloramine, THMs, HAAs and many more chemicals, Fluoride & Heavy Metals.
Cleaning Area:
The ceramic carbon filter will reduced the following: * Parasites & Bacteria >99.9999% * Turbidity is reduced >99%. * Lead @ 150 ppb >99%, 500 gallons * Chlorine @ 2ppm >99%, 2000 gallons * THMs & HAAs >98% * VOCs ~95%, 400 gallons * Particulates @ 0.5 microns > 99.9999%, * Bad Taste & Odor - Class 1 * Fluoride @ 0.8 ppb * Aluminum, Arsenic III + V, Cadmium, Chromium III, Iron, Manganese, Nickel >80% *Mercury, Chromium VI ~50%
Filter Media:
Ultra-Ceramic with Metalgon filter uses micro-filtration to eliminate parasites and bacteria down to 0.3 microns, and high density activated carbon to reduce chlorine, chloramine, bad taste & odor, turbidity, lead, fluoride, THMS & HAAs, and VOCs. Please note that because the Imperial Ultra-Ceramic with Metalgon has a smaller pore size, the flow rate will be approximately 20-30% slower than the standard ceramic filter. This allows for more contact time with the filter to remove higher levels of parasites and bacteria, as well as additional chemicals. Additional chemical and heavy metals in the source water will effect the performance of the ceramic filter.
Filter Change:
1-2 People change the filter every 9 months. 2-4 people change the filters every 6 months. br> Intervals for changing filter will vary. High sediment will require frequent cleaning or an additional sediment filter. Do not continue to use filters past recommended time period.
Return Policy:
In the event the unit isn't working out for you, you may return it within 2 weeks of purchase. You must contact our Customer Service Department for a return authorization number. Complete the return form that was sent with your invoice. Be sure to include any materials you received, such as the instruction booklet, as well as any parts that may have come with the unit. All units must be put in a separate box so that there are no shipping labels or writing on the original packaging. We suggest you insure the package and all return shipping charges are your responsibility. Upon its return, the unit will be inspected, and if it's in resellable condition we will credit you back less a 10% restocking fee. In the event the unit is damaged or defective, please save all packing material and contact our Customer Service Department immediately for further instructions.
Additional Info:
Cleaning Instructions: Dirt and rust can be removed from the surface of the ceramic filter restoring the flow rate and increasing the life span of the filter for up to 1 year. Use an abrasive, non-detergent pad (scotch bright) and lightly rub the sediment off the ceramic filter. Do not use a brush or brillo pad. It will damage the ceramic filter. Do not try to restore the filter to the original color, too much wear will lower the efficiency of the filter and could damage the ceramic.
|
|
|||||||||||||||||||||||||||||||||||
Enlarge Image
