|
||||||||||||||||||||||||||||||||
|
Product Description:
People are becoming more and more concerned about the adverse health effects caused by the harmful chemicals found in typical caulks. Prolonged exposure to these toxic chemicals can cause nausea, allergic reactions and environmental illness. AFM products are different. We have spent the past 15 years working to create products which are safer for human health and which eliminate toxicity to the greatest extent possible, while still providing superior performance. While some products cannot be made completely safe, it is our goal to provide the least toxic formulations available anywhere, allowing you to obtain the quality you need while reducing as much as possible the risk to your health and the environment. Safecoat DynoSeal Driveway/Asphalt Sealer is a low odor elastomeric sealer and topcoating for asphalt surfaces. It helps to reduce the offgassing and offensive smells generated by new asphalt, while preserving and renewing existing asphalt surfaces. DynoSeal Driveway/Asphalt Sealer can be used on unsealed or previously sealed asphalt surfaces. It can be mixed with sand to make an asphalt driveway patch for small areas. *Premium quality *Minimal outgassing *Formaldehyde free *Low VOC content *No unnecessary chemicals *Very low odor upon application and odor free once cured
Warnings:
Health Precautions: As with all coatings and sealers, keep container tightly closed and out of the reach of children. Do not take internally. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.
Additional Info:
Limitations: DynoSeal Driveway/Asphalt Sealer is made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not subject coating to temperature extremes. Do not use when air or surface temperature is below 55°F. Do not freeze. Limited Liability: The great variation between environmental factors, possible surfaces and application techniques, and the lack of control we have over such matters, must affect our policies. Safecoat products are guaranteed not to be defective when applied and used in accordance with instructions. However, liability, whether express or implied, is limited to replacement of product or refund of purchase price and cannot include liability for labor costs or consequential damages. Because of the variety of circumstances affecting each job, it is the user's responsibility to determine the suitability and safety of the product for any particular application. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface. Limited Warranty: Safecoat products are guaranteed not to be defective when applied and used in accordance with instructions. However, liability, whether express or implied, is limited to replacement of product or refund of purchase price and cannot include liability for labor costs or consequential damages. Because of the varying circumstances affecting each job, including environmental factors, possible surfaces and application techniques, and the lack of control we have over such matters, it is the user's responsibility to determine the suitability and safety of the product for any particular application. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface. Not tested on animals. Non-photochemically reactive.
Packaging:
Metal Can
Ingredients:
VOC: Less than 100 grams per liter.
Does Not Contain:
Animal Ingredients or Formaldehyde Preservatives.
Suggested Use:
Surface Preparation: All surfaces must be clean, dry, free from dirt, dust, grease, loose sand or any other foreign matter. Use a high pressure water wash with a solution of SafeChoice Super Clean and warm water to clean surface; additional scrubbing may be necessary. Rinse thoroughly with clean water and let dry. DynoSeal Driveway/Asphalt Sealer can be applied over damp, but not wet, surfaces. Mix DynoSeal Driveway/Asphalt Sealer with equal parts of sand to make a patch for small damaged areas in asphalt. Allow patch to dry 12-24 hours before topcoating. Application: Apply with brush, roller, broom or squeegee. Apply in thin, even coats and avoid laps or puddling. Use on dry surfaces and avoid applying over hot surfaces. Do not apply when there is a threat of rain, if rain is imminent within 72 hours of final topcoat, or on humid days. Allow at least 24-36 hours of curing before allowing heavy traffic to travel on newly coated surface. Sand can be added to coating to give greater fill characteristics on badly weathered asphalt. Sand can also be sprinkled on surface to help eliminate tackiness if too much coating has been applied. Thinning: Thin with water if necessary. Thin only with enough water to get coating to dry sufficiently into the surface and not remain excessively tacky. Highly weathered asphalt will not require any thinning to product. New or extremely well maintained asphalt will require thinning with equal parts of water for proper penetration. To achieve maximum seal, apply full strength. Apply to a test area before doing large areas. Coverage: One gallon of DynoSeal Driveway/Asphalt Sealer covers approximately 100-600 square feet per gallon depending on dilution and surface condition (porosity). Coating that has been mixed 1:1 with sand will normally coat about 15-50 square feet per gallon. Clean-Up: Clean tools and equipment with a diluted solution of SafeChoice Super Clean and warm water. Drying/Curing Time: Under normal conditions, DynoSeal Driveway/Asphalt Sealer dries within 2-4 hours. Material appears brown/gray during application and is black when dry. If coating remains tacky after 24 hours, mix 1 part sand, 1 part water, 1 part DynoSeal Driveway/Asphalt Sealer and coat surface again. Coating should dry without any serious tackiness.
|
|
||||||||||||||||||||||||||||||
Enlarge Image