Needs - Your Resource for Health and Wellness
Call Toll Free: 1-800-673-1308
Facebook
Blog
Twitter
Twitter
Twitter
spacer
Listen and Learn
Teleseminar Speaker "How to Corona-Proof Your Life Follow Up" with Dr. Sherry Rogers.
spacer
spacer spacer
PayPal
About TransFirst®
Card Acceptance
Shipping
Doctor's Best Authorized Online Retailer


Safecoat Low Odor 3 in 1 Adhesive Enlarge Image Email to a Friend AFM
Safecoat Low Odor 3 in 1 Adhesive
ITEM NUMBER:    AFM-5065-128
SIZE:    128 Fluid Ounces
Your Price: Due to its weight, the 128 FlOz size carries an additional shipping surcharge of $3.00.
Qty:  

Product Description: People are becoming more and more concerned about the adverse health effects caused by the harmful chemicals found in typical adhesives. Prolonged exposure to these toxic chemicals can cause nausea, allergic reactions and environmental illness.
AFM products are different. We have spent the past 15 years working to create products which are safer for human health and which eliminate toxicity to the greatest extent possible, while still providing superior performance. True, some products cannot be made completely safe; it is our goal, however, to provide the least toxic formulations available anywhere, allowing you to obtain the quality you need while reducing as much as possible the risk to your health and the environment.
Safecoat 3 in 1 Adhesive is a low odor, non-toxic, water-based adhesive designed for hard composition wall and floor tiles and carpeting.
Use On: Safecoat 3 in 1 Adhesive is recommended for adhering floor tiles made of ceramic, vinyl, parquet, formica and slate; for lightweight wall tiles; and for any carpet application where a typical carpet adhesive would be used.
Non-photochemically reactive. Not toxic, doctor recommended and premium quality. Minimal outgassing; low VOC content. No unnecessary chemicals; very low odor upon application and odor free once cured.

Warnings: Health Precautions: As with all adhesives, keep container tightly closed and out of the reach of children. Do not take internally. Keep from freezing. Always use adequate ventilation. If you are chemically sensitive, always test for personal tolerance.

Additional Info: Limitations: Unlike most conventional coatings, Safecoat is made without formaldehyde preservatives. Do not contaminate. Keep from freezing. Interior use only. Do not use when indoor or surface temperature is below 55 degrees F.
Limited Warranty: Safecoat products are guaranteed not to be defective when applied and used in accordance with instructions. However, liability, whether express or implied, is limited to replacement of product or refund of purchase price and cannot include liability for labor costs or consequential damages. Because of the varying circumstances affecting each job, including environmental factors, possible surfaces and application techniques, and the lack of control we have over such matters, it is the user's responsibility to determine the suitability and safety of the product for any particular application. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface.
Not tested on animals.

Packaging: Aluminum Can
Ingredients: VOC: Less than 100 grams per liter.
Does Not Contain: Formaldehyde or Animal Ingredients.
Suggested Use: Surface Preparation: All substrates to receive adhesive and overlays must be sound and intact. Any loose areas should be repaired or anchored to produce a firm footing for adhesion. All surfaces must be cleaned of any grease, oil, dust, dirt, wax, unsound prior adhesive and other foreign materials. Washing with a low odor, not toxic cleaner like SafeChoice Super Clean is recommended. Surface must be completely dry and stable prior to application. For maximum adhesion, apply a thin coating of Safecoat Safe Seal to the substrate and if possible the back of the tile before spreading adhesive and laying the tiles.
Application: Always have adequate ventilation. For mexican pavers and ceramic tile, application should be made with 1/8" or larger notched trowel (commonly v-notched for walls and square notched for floors, but consult your installer), except that a 3/16" notched trowel should be used for wall tiles. All other applications require 1/16". Due to rapid cure do not spread the adhesive over areas larger than 16-20 square feet. Allow adhesive to set up or "tack-up" for a few minutes (typically not more than 10-15 depending upon temperature and humidity), and then insert tiles into mastic. All tile must be at room temperature and above 55 degrees. Maintain a wet, tacky surface during installation of the tile. Do not allow adhesive to skim over. If a film forms or adhesive skims over, or sets up so that it is no longer sticky, scrape all adhesive off the surface and reapply. Allow 24 hours for 3 in 1 Adhesive to cure out before opening to traffic or for any further surface filling. A trial application is recommended to assure proper adhesion can be obtained.
Testing is particularly important for parquet and wooden floor material, which varies considerably in consistency and may have a tendency to warp. Again, seal the bottom of the material with Safecoat Safe Seal to help provide a moisture barrier.
Coverage: 50-60 square feet per gallon with 1/8" notched trowel. 100-120 square feet per gallon with 1/16" notched trowel.
Clean Up: Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water.
Drying/Curing Time: 24 hours for full cure.


Related Products
Safecoat Low Odor 3 in 1 Adhesive